3D STICK-ON TILES INSTALLATION
Chevron Tile Installation Guide
Follow these steps to install your chevron peel and stick tiles with a clean, aligned finish.
This shape requires minimal cutting and is easy to align, making it a friendly choice for most DIY projects.
Clean the Surface
Wipe the wall clean before installation. Make sure the surface is dry, smooth, and free from dust, oil, or loose paint.
Measure and Mark
Before peeling the backing, use a level and pencil to mark a straight guide line on the wall. This helps keep each tile sheet aligned.
Overlap the Side Edge
When placing the next sheet, fully overlap the grout-line edge of the previous sheet. The green marked area shows the edge that should be covered, helping create a correct and evenly spaced grout-line look.
Cut If Needed
The tile sheet can be cut easily. Trim around corners, outlets, edges, or narrow spaces with scissors, a utility knife, or other cutting tools.
Overlap Top and Bottom
When installing the next row, fully overlap the top or bottom grout-line edge. The green marked area shows the edge that should be covered, helping keep the pattern connected and the grout-line look even.
Enjoy the Finished Look
Once all sheets are aligned, overlapped, and pressed firmly, your chevron tile backsplash is complete. Enjoy the refreshed wall.