3D STICK-ON TILES INSTALLATION
Linear Tile Installation Guide
Follow these steps to install your linear peel and stick tiles with a clean, aligned finish.
This shape requires minimal cutting and is easy to align, making it a friendly choice for most DIY projects.
Clean the Surface
Wipe the wall clean before installation. Make sure the surface is dry, smooth, and free from dust, oil, or loose paint.
Measure and Mark
Before peeling the backing, use a level and pencil to mark a straight guide line on the wall. This helps keep each tile sheet aligned.
Overlap the Side Edge
Start from the corner or marked guide line. When placing the next sheet, slightly overlap the side edge shown in green to hide the joint.
Cut If Needed
The tile sheet can be cut easily. Trim around corners, outlets, edges, or narrow spaces with scissors, a utility knife, or other cutting tools.
Overlap Top and Bottom
When installing the next row, slightly overlap the top or bottom edge shown in green to keep the pattern connected and seamless.
Enjoy the Finished Look
Once all sheets are aligned, overlapped, and pressed firmly, your linear tile backsplash is complete. Enjoy the refreshed wall.